Flat Deck - Steel - Super B - Low Rider
HB27344
40 Series; 4' concentrated approx. 40,000 lbs.; 1 O' concentrated approx. 45,000 lbs.; Deck height approx. 58" @ front of lead & 50" @ back of rear
Tubing outer rail with 1/4" rod welded on top of 3 x 4 tubing
(continuous weld on top with stitch weld on bottom of rod) - full length both sides of trailer
Jost LO-LUBE
Full width aluminum bolt-on hinged bumper with 3/4" penny marker lights facing back
Driver Side Majority: Tubing Outer Rail = 37 winches (16 D/S & 4 C/S Lead; 14 D/S & 3 C/S Rear); Channel Outer Rail= 36 winches (16 D/S & 4 C/S Lead; 13 D/S & 3 C/S Rear)
Winch strap winder located by landing gear - C/S rear trailer
Winch strap winder located by landing gear - C/S lead trailer 2 winches (3 bar) c/w 3/4" socket slot and thumb saver pawl at back of rear trailer with in-deck cross pallet hooks at 4'-1" from back of trailer
Cambered axles
Hendrickson Tiremaax PRO Tire Inflation System set to 100 PSI on 22.SR tires; 95 PSI on 24.5R tires
MT, 6" wide
22.5 -10-hole aluminum unimount - plain'
22.5 - 10-hole aluminum unimount - plain
11 R22.5 - Sailun S622 Load Range G
Flat - Aluminum checker plate fender over center and 3rd axle of tri group
Bolt-on mud flap bracket w/ mud flaps full width at landing gear on rear trailer
Mud flaps in front of brake pots - front axle only - lead and rear trailers
Bolt-on mud flap bracket w/ mud flaps full width at landing gear on lead trailer
HRV-1 (5 marker lights located in-between the 4" tail / signal lights); DWG# TBD
Chromed plastic rings screwed over rubber grommets on all 4" rear lights & 2-1/2" rear facing marker lights (if applicable) & around 3/4" penny marker lights; stainless steel anti-theft rings riveted on all oval side signal lights
Chromed plastic rings screwed over rubber grommets on all 4" rear lights & 2-1/2" rear facing marker lights (if applicable) & around 3/4" penny marker lights; stainless steel anti-theft rings riveted on all oval side signal lights re
Information
Flat Deck - Steel - Super B - Low Rider HB27344 40 Series; 4' concentrated approx. 40,000 lbs.; 1 O' concentrated approx. 45,000 lbs.; Deck height approx. 58" @ front of lead & 50" @ back of rear Tubing outer rail with 1/4" rod welded on top of 3 x 4 tubing (continuous weld on top with stitch weld on bottom of rod) - full length both sides of trailer Jost LO-LUBE Full width aluminum bolt-on hinged bumper with 3/4" penny marker lights facing back Driver Side Majority: Tubing Outer Rail = 37 winches (16 D/S & 4 C/S Lead; 14 D/S & 3 C/S Rear); Channel Outer Rail= 36 winches (16 D/S & 4 C/S Lead; 13 D/S & 3 C/S Rear) Winch strap winder located by landing gear - C/S rear trailer Winch strap winder located by landing gear - C/S lead trailer 2 winches (3 bar) c/w 3/4" socket slot and thumb saver pawl at back of rear trailer with in-deck cross pallet hooks at 4'-1" from back of trailer Cambered axles Hendrickson Tiremaax PRO Tire Inflation System set to 100 PSI on 22.SR tires; 95 PSI on 24.5R tires MT, 6" wide 22.5 -10-hole aluminum unimount - plain' 22.5 - 10-hole aluminum unimount - plain 11 R22.5 - Sailun S622 Load Range G Flat - Aluminum checker plate fender over center and 3rd axle of tri group Bolt-on mud flap bracket w/ mud flaps full width at landing gear on rear trailer Mud flaps in front of brake pots - front axle only - lead and rear trailers Bolt-on mud flap bracket w/ mud flaps full width at landing gear on lead trailer HRV-1 (5 marker lights located in-between the 4" tail / signal lights); DWG# TBD Chromed plastic rings screwed over rubber grommets on all 4" rear lights & 2-1/2" rear facing marker lights (if applicable) & around 3/4" penny marker lights; stainless steel anti-theft rings riveted on all oval side signal lights Chromed plastic rings screwed over rubber grommets on all 4" rear lights & 2-1/2" rear facing marker lights (if applicable) & around 3/4" penny marker lights; stainless steel anti-theft rings riveted on all oval side signal lights rear trailer only - signals must be RED Large - Steel cross frame c/w enclosed 29"W x 19"H x 1 00"D aluminum dunnage box with smooth stainless-steel doors both ends; DWG# 182052V03 Premium - smooth aluminum double doors c/w stainless steel camlock latch & hinges - 22" D x 30" H x 60" L Premium - smooth aluminum double doors c/w stainless steel camlock latch & hinges - 22" D x 24" H x 60" IL Premium - smooth aluminum double doors c/w stainless steel camlock latch & hinges - 22" D x 30" H x 60" L Premium - smooth aluminum double doors c/w stainless steel camlock latch & hinges - 22" D x 24" H x 60" L Tow hooks at back of rear trailer Interior light inside air gauge box - lead & rear trailers